page 1 of 3 www.aecsensors.com sales department tel: (888) 847-6552 dg17 sub-miniature pcb automotive relay contacts contact number & arrangement spst-no (1 form a); spdt (1 form c); spst-no-dm (1 form u); spdt-db-dm (1 form w) contact material agni0.15; agni90/10; agsnoino; agcdo max. switching voltage dc current dependent - see fig 3 min. switching current / voltage 0.1a/5vdc (agni0.15), 0.5a/5vdc (agsnoino) 1 form a 1 form c 1 form u 1 form w no nc no nc max. continuous current dc1 15a 15a 10a 2 x 10a 2 x 7a 2 x 5a max. switching current make 60a (100a agsnoino) 60a (100a agsnoino) 12a 2 x 40a (70a agsnoino) 2 x 30a (50a agsnoino) 2 x 5a break 20a 20a 10a 2 x 20a 2 x 15a 2 x 5a initial resistance 100m?, max. at 0.1a/6vdc coil rated voltage dc 6, 12, 24v must release voltage see coil table 1 operating range of supply voltage see coil table 1 rated power consumption dc 1.1w approx. insulation insulation resistance 100m? at 500vdc, 50%rh dielectric strength coil to contact 500vrms, 1 min. general data operating time (typical) ms 3 release time (typical) ms 1.5 electrical life ops 2 x 10 5 (see note 2) mechanical life ops 1 x 10 7 dimensions l x w x h 17.7 x 15.2 x 19.7 (covered - excluding terminals) weight open: 8g / covered: 12g approx. ambient temperature storage -40 to 155c operating -40 to 85c (higher to special order) shock resistance functional: 10g 11ms; destructive: 100g vibration resistance functional: no 20g; nc 10g 10-200hz drop resistance 1m height drop on concrete in fnal enclosure ? 15a continuous current capacity ? agsnoino contacts for motor & lamp loads ? open, dust cover and sealed versions ? automotive oriented design ref: dg17 121713jhm rohs compliant
ordering codes type contact material contact arrangement cover protec - tion and mounting coil code options d g 1 7 - - 5 - - contact material 10 - agcdo see coil table 1 20 - agni (90/10) 70 - agsnoino 80 - agni 0.15 contact arrangement 11 - spdt (1 c/o, 1 form c) 21 - spst-no (1n/o, 1 form a) 8u - spst-no-dm (1 form u) 8w - spdt-db-dm (1 form w) cover protection category 1 - no cover, ip00 3 - in cover, sealed - ip67 7 - in cover, dust cover - ip54 connection mode 5 - for pcb coil options nil - no options f - ul class f insulation for high ambient temperatures h - ul class h insulation for high ambient temperatures dg17 sub-miniature pcb automotive relay ref: dg17 121713jhm coil data table 1 coil voltage code nominal voltage (vdc) coil resistance (?) 10% must operate voltage max. (vdc) allowable voltage (vdc)* must release voltage min. (vdc) 1 form a/c/u 1 form w 1 form a/c/u/w 1006 6 28 3.75 4.5 8 0.7 1012 12 130 7.50 9.0 16 1.4 1024 24 520 15.00 18.0 31 2.8 * at ambient temperature of 85c, maximum allowable voltage should be reduced to 72% page 2 of 3 www.aecsensors.com sales department tel: (888) 847-6552
dg17 sub-miniature pcb automotive relay american electronic components inc., 1101 lafayette st. elkhart, in46516 page 3 of 3 www.aecsensors.com sales department tel: (888) 847-6552 overall dimensions fig. 1 wiring diagrams fig. 2 wiring diagrams (bottom view) dimensions in mm reference curves fig. 3 specifcations are subject to change without notice. e&oe. ref: dg17 121713jhm notes: 1: all parameters, unless otherwise specifed, are measured at ambient temperature of 23 o c. 2: electrical life obtained at resistive or inductive load at 10a, 15vdc for 1 form a/c/u/ and 7a, 15vdc for 1 form w, with suitable arc sup - pression circuit attached and with operating frequency of 1 op/sec. 3: maximum make current refers to lamp load inrush current. 4: for optimum electrical life, please remove the knock off nib of the sealed version after cleaning process. open frame covered pcb mounting dimensions (bottom view) 1 form a (spst- no) 1 form c (spdt ) 1 form u (spst- no-dm ) 1 form w (spdt- db-dm )
|